Facebook LinkedIn


Insulation and protection of slopes and ditches

The membrane GXP® Plus 5+5, made from high density polyethylene (HDPE), owing to its structure of double embossings, ensures an increased friction angle of the ground on both sides. It is especially useful in areas with a high inclination angle, such as ditches, tanks, etc. and because of its two-side high ventilation capacity as an air gap between 2 concrete walls.


  • Increased friction angle of the ground on both sides
  • High two-side ventilation capacity
  • Increased compression and breakdown strength
  • It enables a unifrom distribution of loads caused by ground pressure

Technical Data

Technical Data
MaterialPressed foil HDPE (high density polyethylene)
Roll width2,0 m i 4,0 m
Surface mass650-1000 g/m2
Embossing height10 mm
Temperature resistance-40 do +80oC
Drainage capacity (if it’s connected to the geotextiles)4,8 l/s/m | 288 l/min/m | 17 280 l/h/m


For Download

1.42 MB | pdf